Transmission — Blog
Blog & projects

Working satellites portable
On July 26, 2023, I gave a demonstration at the NVRA on how to connect via one of the TEVEL satellites. We were lucky, because on this evening we had a nice pass with 60+ degrees elevation…

Portable Satellite Antenna
Now that I’m more portable, I wanted to do something with amateur satellites again. I mainly want to do this with the IC-705. Unfortunately, the IC-705 cannot work full duplex. So we depend…

Homebrew Manpack for my IC-705 and accesoires
If you have some time on the weekend to work portable. then you don’t want to spend a lot of time setting up and connecting my equipment. especially if this is the same setup every time. I…

40m Deltaloop for NVIS
I’ve always been interested in all kinds of loop antennas. This is because closed systems are generally less sensitive to QRM and therefore receive more quietly. What I’ve been wanting to…

Refurbishing Glassfiber Poles
I have always been a big fan of army dump camo net poles to use as a mast, both portable and fixed based. These were always widely available for a nice hobby price at an army dump. When I…

Portable with the IC-705
Recently I was invited to my old model flying club for a cup of coffee 🙂 Excellent opportunity to test my IC-705 in peace. Used antenna: an EFHW on a 13m portable mast. At home I had…

Adjust LNB L.O. (BT-180) or any other DRO LNB
Recently I got my hands on a very good performing LNB for 10 ghz amateur television. Available on aliexpress under the name BT-180 with an LO of 9GHz. There was only a slight problem using…

ATV Receiver project
Some time ago, Hans PE1ICE developed a compact ATV Receiver that could demodulate FM audio and Nicam audio also. Link to project…

Getting better 10GHz reception, modifying the mast :-)
Reception at 10Ghz can be quite a challenge, especially if you can receive the station to be received on the edge. I really had the problem that the signal went up and down even with a…

HB9CV 3.5m Project
A friend of mine Gertjan PA3FZB who is crazy about 3.5m broadcast “amateur” stations 😉 recently came up with an article about a HB9CV design for 3.5m. He asked me if I could build it for…

23cm Yagi Antenna building
First attempt to build a 23cm Yagi. I had been looking for an antenna for 23 and 13cm for a while now. As I wanted to listen to SSB and Amateur Television stations. Now I had found some…

FAQ – How to connect my Rotator Interface to a Rotator
Some people asked my some questions about how to properly connect my Rotator interface to their rotators. Most common questions are: My rotator will not rotate back when rotation is at max…