‹ All posts

SDRCat: Your Radio and the WebSDR, Finally in Sync

14 Jun 2026

I’m happy to announce the release of SDRCat v1.0 — a free Windows application

that links your transceiver to a WebSDR receiver via CAT control (Hamlib).

Change the frequency on your radio and the WebSDR follows. Click a signal in the WebSDR and the
frequency goes straight to the transceiver. A live band scope while you operate on your own antenna,
with no extra hardware required.

SDRCat v1.0 — live sync on 10 m (28 MHz)
SDRCat v1.0 — live sync on 10 m with the Twente WebSDR

Key features

  • Two-way sync — CAT → WebSDR and WebSDR → CAT, polled every 200 ms
  • Mode sync — USB, LSB, AM, FM and CW follow the rig automatically
  • Audio routing — route WebSDR audio to any Windows output device, including virtual audio cables (VB-Audio, VAC) to feed a decoder like WSJT-X or fldigi directly
  • Favourites — seven WebSDR stations pre-loaded, add your own
  • Built-in browser — WebSDR runs embedded via WebView2, audio starts automatically

SDRCat connects to any Hamlib rigctld server on TCP port 4532.
HamlibServer —
also available on the site — makes this easy: select your rig, choose the COM port, click Start.

👉 sdrcat.ham4life.com — downloads, screenshots and full documentation.

73, PD5DJ

‹ OlderRotor Server for N1MM and More!