Transmission — Blog
Blog & projects

Homebrew Manpack for my IC-705 and accesoires
If you have some time on the weekend to work portable. then you don’t want to spend a lot of time setting up and connecting my equipment. especially if this is the same setup every time. I…

40m Deltaloop for NVIS
I’ve always been interested in all kinds of loop antennas. This is because closed systems are generally less sensitive to QRM and therefore receive more quietly. What I’ve been wanting to…

ATV Receiver project
Some time ago, Hans PE1ICE developed a compact ATV Receiver that could demodulate FM audio and Nicam audio also. Link to project…

Getting better 10GHz reception, modifying the mast :-)
Reception at 10Ghz can be quite a challenge, especially if you can receive the station to be received on the edge. I really had the problem that the signal went up and down even with a…

HB9CV 3.5m Project
A friend of mine Gertjan PA3FZB who is crazy about 3.5m broadcast “amateur” stations 😉 recently came up with an article about a HB9CV design for 3.5m. He asked me if I could build it for…

23cm Yagi Antenna building
First attempt to build a 23cm Yagi. I had been looking for an antenna for 23 and 13cm for a while now. As I wanted to listen to SSB and Amateur Television stations. Now I had found some…

Diamond MX62M Diplexer Modification for IC-705
Simple conversion description MX62M with BNC Connectors. UPDATE! 02-07-2023. I have replaced the BNC Pigtail cable with a fixed BNC Panelmount version instead to be more flexible. Recently…

Magnetic Loop Controller update
Update! 30-12-2022. It’s been a while since I gave an update on the Magnetic Loop controller project I’m working on with Rob PA5RH . The purpose of the Loop Tuner was that it can tune…

Magnetic loop construction – PART 2
Some time has passed, and a lot has been done so far. Construction Tuning Section. First I had to find a way to mount the vacuum condenser on the mounting plate. Because I print a lot in…

Start of build Automatic Magnetic Loop controller – PART 1
Recently my colleague, Rob PA5RH and I came up with the idea to build an automatic loop tuner. Rob is busy with the software part where I have already started on the mechanical part. As…

CC41-A fake HM-10 Bluetooth module, let’s get it working!
How to get the CC41-A to work with your applications. I have bought several of these fake HM-10 modules, called CC41-A Left one is the original HM-10 module, in the middle is the fake…

Create precision OSL loads yourself
To be able to calibrate the Analyzer properly (OSL), we need accurate loads. It is also important that the loads function well over the entire spectrum, show no reflections or have other…