Transmission — Blog
Blog & projects

CI-V Tuning aid for ICOM Radios
Updates. 17-04-2024: Firmware v0.2 Almost every HF radio from ICOM has a Tuner connector, you know that white 4-pin connector at the back of your radio. Via this connector you can give a…

Signal Splitter box
Due to illness I had to enjoy myself a bit at home with the moments when I felt a bit good. I had small projects that were already finished but still needed to be build into an enclosure…

Portable ATV Receiver
A while ago I came up with the idea of building a portable ATV receiver. Important features of this receiver had to be: 1. Large screen with real noise (no fake noise) 2. Of course with…

New Symmetrical Antenna system for HF
I’ve been thinking about setting up a symmetrical antenna system for a while now. That is, Ladder line fed dipole. I did a bit of measuring and was able to stretch 2 x 9m of wire. I bought…

Universal DCD for 1200bd Packet modems.
Since I’m working with packet again, you encounter all kinds of problems and then have to solve them again. The same now. I recently purchased an AEA PK-88 packet modem. Only this one has…

New Portable setup
The summer of 2023 has ended, as well as portable operations. What I have noticed during my activations is that QRP can be a lot of fun, but also too challenging. If you want to continue to…

Working satellites portable
On July 26, 2023, I gave a demonstration at the NVRA on how to connect via one of the TEVEL satellites. We were lucky, because on this evening we had a nice pass with 60+ degrees elevation…

Homebrew Manpack for my IC-705 and accesoires
If you have some time on the weekend to work portable. then you don’t want to spend a lot of time setting up and connecting my equipment. especially if this is the same setup every time. I…

ATV Receiver project
Some time ago, Hans PE1ICE developed a compact ATV Receiver that could demodulate FM audio and Nicam audio also. Link to project…

Getting better 10GHz reception, modifying the mast :-)
Reception at 10Ghz can be quite a challenge, especially if you can receive the station to be received on the edge. I really had the problem that the signal went up and down even with a…

HB9CV 3.5m Project
A friend of mine Gertjan PA3FZB who is crazy about 3.5m broadcast “amateur” stations 😉 recently came up with an article about a HB9CV design for 3.5m. He asked me if I could build it for…

23cm Yagi Antenna building
First attempt to build a 23cm Yagi. I had been looking for an antenna for 23 and 13cm for a while now. As I wanted to listen to SSB and Amateur Television stations. Now I had found some…